To Next PageTo Next Page
Need help?Do you have a question about the Icera St.Thomas iWash CS-20 and is the answer not in the manual?
Safety warnings related to electrocution risks.
Safety warnings for burns, electrocution, fire, and injury.
Additional safety warnings for personal safety.
Cautionary advice to prevent injury or product damage.
Identification of the main components of the bidet toilet.
Overview of the control panel on the bidet seat.
Overview of the buttons and functions on the remote control.
List and identification of parts included with the unit.
List of necessary parts and tools not included with the unit.
How to properly sit on the seat to activate sensors.
Instructions for operating the wash functions via remote.
Instructions for operating the dryer function via remote.
How to stop active functions and return the nozzle.
How to activate and use the oscillating nozzle movement.
How to adjust the nozzle position forward or backward.
How to adjust the water pressure during wash cycles.
How to select water temperature settings for washing.
How to adjust the temperature of the warm air dryer.
How to adjust the seat's heating temperature.
How to activate and deactivate the deodorizer function.
How to activate the LED nightlight feature.
How to set up and disable the automatic flushing feature.
How to flush the toilet using the remote or seat controls.
How to save and activate personalized user settings.
How to use standard, auto, and eco power saving modes.
How to turn the unit on and off using the control panel.
Instructions for manual nozzle cleaning and self-cleaning.
Automatic seat temperature reduction to prevent burns.
Crucial notes regarding product inventory and installation preparation.
Steps for connecting the water supply line to the angle stop.
Steps for inserting mounting bolts and positioning the gasket.
Identifying and connecting the flush and rim jet hoses to the bowl.
Connecting the bowl jet, rim jet, and water supply lines to the seat.
Installing seat anchors, bolts, and covers for securing the seat.
Assembling the water filter, brass adapter, and supply lines.
Aligning the bowl to the flange and tightening mounting nuts.
Snapping in cover tiles after securing the bowl.
Connecting the main water supply hose to the angle stop.
Turning on the water and checking for any leaks.
Plugging the unit into GFCI and testing spray functions.
Steps to clean the water filter to restore water pressure.
Instructions for manually cleaning the wash nozzle.
Steps to change the remote control frequency for multiple units.
General
