7
1.
In Bluetooth connected mode, you can switch the Bluetooth Speaker
into Bluetooth searching/pairing mode for pairing with the new device
at any time you desire;
2.
Press and hold the “ / ” (5) button until a series of tones sound, the
“ MODE” Indicator (7) will switch to rapidly flashing blue instead of
blinking slowly.
3.
Now you can process for a new mobile device pair. (refer to part 3.2
above)
3.6. Bluetooth Music Playing Control Function
1.
In playing music, press the “ / ” (5) button to pause the playing
music. To resume press it again.
2.
Press and hold the “ / ” (6) button to increase the volume level.
3.
Press and hold the “ / ” (4) button to decrease the volume level.
4.
When the maximum or minimum volume is reached, a beep sound
will be heard.
5.
Press the “ / ” (6) button once to go to the next track.
6.
Press the “ / ” (4) button once to go to the previous track.
3.7. Hands-Free Function
1.
When there is an incoming call during Bluetooth music playing mode,
the ringing sound will appear and the currently playing music will
automatically be paused.
2.
Press the “ / (5)” button to pick up the call if you want.
3.
Now you are using the hands-free function with the Bluetooth speaker.
4.
Press the “ / (5)” button again to hang up the call when it’s finished.
The music that was being paused, will resume to play automatically.
5.
Press and hold the “ / (5)” button for 3 seconds to ignore the
incoming call.
Tip: Speak to the “MIC” (10) hole directly with a distance between
30~60cm to get the best speakerphone performance, if necessary.
3.8. Re-dial for Last Call Function
This function is to re-dial the last-called number with the Bluetooth
Speaker, even when it is in music playing mode.
1. Press the “ / ” (5) button twice to enter into the re-dialing function;
the music that’s playing will automatically pause and switch to the
hands-free function for redial.
2. Press the “ / ” (5) button again to finish the redialed call.
To Next Page
Loading...