iCES IBTS-6 - Reset the Device; Trouble Shooting; Specifications

9
doesn’t have enough energy.
4. Press and hold the “ / ” (3) button to turn the device On after it’s
charged with enough energy if you want.
3.12 Reset the Device
In some circumstances the device’s functions may not function well and
need to be reset. To reset the Bluetooth speaker:
Press the “ / ” (4) and the “ / ” (6) button at the same time; the
device is reset and turns OFF. Then press and hold the “ / ” (3) button
to turn On and restart the device after the reset is done.
4. Trouble Shooting
Speaker
doesn’t switch
on
•
Check whether the battery is charged with enough
energy.
No sound is
heard
•
Check whether the volume level is in lower position
on your speaker and mobile phone or PC/Mac.
• Make sure that your Bluetooth device is within the
effective operation range.
• Check whether the Bluetooth device is paired.
• Check whether the Bluetooth device shows it’s
connected.
• Check whether you have selected the correct audio
source.
• If using the AUX IN port, make sure the 3.5mm jack
cable is securely inserted into the Bluetooth Speaker
and your device.
No response
from speaker
•
Restart the speaker by means of the reset function.
5. Specifications
Unit Dimensions
62.3 mm (L) x 62.3 mm (W) x 59 mm (H)
Unit Weight
143.5 gr.
(approximately)
Bluetooth
Specification
V2.1 + EDR
Supported Profile
A2DP, AVRCP, HSP, HFP
Connection Distance
Within 10 meters (open
area)