30 icklebubba.com
Connecting Car Seat to Stroller or Pram /
Raccordement du siège auto à la poussette ou au landau /
Verbinden des Autositzes mit dem Kinderwagen oder Buggy /
Conexión de la silla de auto a la silla de paseo o al cochecito /
Collegare il seggiolino auto al passeggino o alla carrozzina
EN:
1. Prepare your pram or stroller for car
seat fitment. Refer to your stroller
manual for guidance in attaching
the car seat adaptors correctly.
2. Lift and lower the car seat onto the stroller
or pram adaptors so they slide into the
slots found underneath the left and right
handle hubs of the car seat. NOTE:
The car seat must be parent facing.
3. When correctly aligned with the adaptors,
apply even pressure on the left and right
sides of the car seat until you hear a
‘click’ to confirm it is locked in position.
4. To release the car seat from the pram
or stroller, press and hold each of
the adaptor release buttons, whilst
simultaneously lifting the car seat up.
The adaptor release buttons are located
above the adaptors, on the inside of the
carry handle on the car seat as shown.
To Next Page
Loading...
