09
1. To use the seat unit in
pram mode, discon-
nect the
two clips locat-
ed at the bottom of the
seat unit, and loosen the
toggle at the top. Push
the fabric downwards
from the inside to en-
sure it lies flat.
2. To convert pram
body to seat unit,
connect the
two clips
located at the bottom
of the pram body/seat
unit
3. Tighten the tog-
gle located on the
top of the pram
body/seat unit. Ensure
that all fabrics and
buckles are secure
before use.
Asse
mbly - Converting Pram to Seat
Operating the Brakes
1. To engage the brake, apply
a light downward pressure to
the brake lever. Ensure that the
brakes have been applied cor-
rectly and that the stroller will
not move.
2. To release the breakes, gently
lift up the brake lever.
To Next Page
Loading...
