Ickle Bubba Venus - Setting up the Newborn Cocoon

Setting up the Newborn Cocoon (only included with Prime
bundle)
a. Unfold the cocoon and unclip
the buckles. Locate the 5 cocoon
inserts. The base board may be
already inserted into the base of
the cocoon. To remove or insert
the base board, unfasten the
Velcro strip on the base of the
cocoon and move the board as
needed.
b. Unfasten the zips located at
the bottom of the top and foot
end of the cocoon and fit the end
inserts into each end.
c. Unfasten the zips located on
either size the cocoon and insert
the side inserts, ensuring that
the flat side is at the top of the
cocoon and the curved side is at
the base.
d. Ensure all zips are fastened
once the inserts are fitted, and fit
the cocoon apron using the zip, if
desired.
Set Up & Assembly
7