icklebubba discovery - Using the Breaks; Bumper Bar Operations

Using the Breaks
1. To engage the break, press
down on either of the clips
located over the back wheels
2. To release the break, lift
either of the clips upwards
Inserting and Removing
the Bumper Bar
1. With the footbreak engaged,
attach the bumper bar to the
corresponding slots in the front
of the stroller
2. Remove the bumper bar
by pressing the button lock
underneath and pulling it
outwards
WARNING: THE BRAKES MUST BE ENGAGED EACH TIME YOUR STOP WITH
YOUR CHILD IN THE STROLLER
06