Icom IC-207H - Page 62

13 WIRELESS OPERATION
Hi HM-90 switches
Front and side panels Rear panel
@ PTT SWITCH
> Push and hold to transmit; release to receive.
= Toggles between transmitting and receiving while the
one-touch PTT function is in use.
@ BAND SWITCHES [BAND SELECT 4,¥]
Select a band.
© MONITOR SWITCH [MONI]
Toggles between opening and closing the squelch.
© SQUELCH LEVEL UP/DOWN SWITCHES
[ASQL], [VSQL]
Vary the squelch threshold point for noise mute.
(f
«
@ FREQUENCY UP/DOWN SWITCHES [UP], [DN] (
» Push either switch to change the operating Wiis
memory channel, set mode contents, etc.
» Push and hold either switch to start scanning. (
@ ACTIVITY INDICATOR |
Lights red while a key is pushed; lights green while th
one-touch PTT function is in use. (
@ AUDIO VOLUME UP/DOWN SWITCHES (
[AVOL], [VVOL]
Adjust the accessed band’s audio level. (
© MODE INDICATOR “
Indicates the microphone condition.
¢ Lights red when [FUNC] is pushed. (
¢ Lights green when [DTMF KEY] is pushed. |
¢ Lights orange when [DTMF MEMO] is pushed. C
© LOCK SWITCH [LOCK] (
Locks all switches and keys on the microphone except fc
the PTT switch. (
@ KEYPAD a
Used for controlling the transceiver, transmitting a DTM
memory channel, etc. K
: (