Icom IC-M506EURO - DSC Settings

61
7
DSC OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
DSC Settings ■
D Position Input (See page 21)
D Add Individual ID/Group ID (See pages 18, 19)
D Delete Individual ID/Group ID (See page 20)
D Automatic Acknowledgement
These items set the Automatic Acknowledgement function to
“Auto” or “Manual.”
When an Individual, Position Request, Polling Request or
Test Call is received, the transceiver automatically transmits
an Individual Acknowledgement, Position Reply, Polling Re-
ply or Test Acknowledgement Call, respectively.
When “INDIVIDUAL ACK” is set to “Auto,” the transceiver
automatically transmits the Acknowledgment call including
“Unable to Comply” (No Reason Given) after receiving the
Individual call.
q
Enter either “INDIVIDUAL ACK,” “POSITION ACK” or “TEST
ACK” in the DSC Settings menu.
MENU ➪ DSC SET ➪  Individual ACK 
(Push [MENU]) (Select icon) (Rotate dial, then push [ENT].)
MENU ➪ DSC SET ➪  Position ACK 
MENU ➪ DSC SET ➪  Test ACK 
Rotate dial or push [ w Y]/[Z] to select “Auto” or “Manual”
then push [ENT].
 •Push[BACK]tocancelandreturntotheDSCSettingsmenu.
(default)
(default)
(default)
Push [EXIT] to return to the normal operating mode. e