20
2
DRIVER INSTALLATION
@0After the installation is completed, click [Finish].
@1Eject the CD.
• Restarting the PC is recommended.
■ Microsoft
®
Windows
®
Me
qQuit all applications when Windows is running.
wConnect the Main unit to the desired PC’s USB port with
the supplied USB cable.
CAUTION: Icom Inc. assumes no responsibility for the
receiver’s operation resulting from the use of any other
USB cable other than the one supplied by Icom in the
original IC-PCR1500 or IC-PCR2500 package.
eInsert the CD into the appropriate CD drive.
rTurn the Main unit power ON.
• The power indicator lights.
• “New Hardware Found” appears as below.
To Next Page
Loading...
