88
7
SCAN OPERATION (Multi-function receiver/Component screens only)
■ Versatile memory scan
You can set the memory scan conditions using the [Memory
Scan] setting screen.
qRight-click the zMEMOx button to call up the Memory Scan
setting screen if it is not displayed.
wCheck the desired check boxes, then click the close ([X])
button to close the setting screen.
• When selecting the [SEL] box (select memory scan), repeatedly
scans memory channels these “SEL” settings are turned ON in
memory channel list screen.
• When selecting the [SKIP] box (memory skip scan), repeatedly
scans memory channels except “SKIP” setting is turned ON in
memory channel list screen.
• When selecting the [MODE SEL] box (mode select memory
scan), repeatedly scans all memory channels with the selected
operating mode (in [Select Mode] as below).
To Next Page
Loading...
