Icom IC-T7H - Port Allocations; CPU (Logic Unit; IC1) Port Allocations

7
2
BATTERY PACKS AND ACCESSORIES
■ Charging connections
D Regular charging
Attach the supplied* or optional battery pack; then, connect
the supplied* wall charger via an AC outlet as shown below.
*Optional for versions which include a battery case.
D Rapid charging with the BC-119
➀ Insert the AD-56A into the charging slot of the BC-119.
➁ Insert the AD-56B into the groove in the AD-56A (front-fac-
ing side of the AD-56A).
➂ Insert the battery pack, either by itself or attached to the
transceiver, into the AD-56B.
To [DC13.5V]
Wall charger
BP-171 or
BP-172
attached to
the transceiver
Check orientation
for correct
charging
BP-171 or
BP-172
WITHOUT
transceiver
BP-173 or
BP-180
WITH
or WITHOUT
transceiver
AD-56
(optional)
BC-119
(optional)
Charging periods:
1 hour (w/BP-171
or BP-180)
1.5 hours (w/BP-172 or BP-173)
Charging periods:
15 hours (w/BP-171, BP-173 or BP-180)
20 hours (w/BP-172)
IC-T7H-2.qxd 2007.07.19 4:10 PM Page 7