Icom IC-T7H - I Accessory Attachment; Battery Packs and Accessories

9
2
BATTERY PACKS AND ACCESSORIES
D Antenna
Insert the supplied antenna into the
antenna connector and rotate the anten-
na as shown in the diagram below.
Keep the jack cover attached when
jacks are not in use to avoid bad con-
tacts.
D Belt clip
Remove screws, then attach the belt clip
using the same screws. Conveniently at-
taches to your belt.
D Handstrap
Attach the handstrap as shown in the
diagram below. Facilitates carrying.
■ Accessory attachment
CAUTION:
Transmitting without
the antenna may
damage the trans-
ceiver.
IC-T7H-2.qxd 2007.07.19 4:10 PM Page 9