5
STEP 1: Unpacking
1. Remove the massage chair from the box.
2. Remove all plastic wraps from the massage chair, cushions, bags, etc.
When positioning the chair, make sure there are at least 60 cm of free space behind
the backrest and 60 cm of space in front of the footrest.
STEP 2: Install the back cushion and pillow pad.
STEP 3: Install the remote control stand
1. Install the remote control on the right side of the massage chair using the small
predrilled holes with the supplied screws.
2. Insert the remote control on the stand.
3. You can adjust both the vertical and horizontal angle of the remote control
for better viewing.
To Next Page
Loading...
