ICONE X7 - Folding and Unfolding Procedures; E-Bike Folding and Opening Steps

3. Folding and methods of use3. Folding and methods of use
FOLDING METHOD:
• Open the saddle closing lever, lower it to the minimum level and close the lever;
• Act on the handlebar stem safety clip (fig.1), lower the handlebar stem lock lever (fig.2), open the stem
until it touches the front wheel (fig.3);
• Operate the frame opening safety clip (fig.4), release the frame opening lever (fig.5), fold the frame until
the two wheels match (fig.6).
OPENING METHOD:
• Unfold the frame, lift the handlebar post and adjust the saddle.
NOTE
• CHECK THAT THE LOCKING LEVERS ARE PERFECTLY LOCKED.
• CHECK THAT THE FRONT WHEEL IS IN AXIS WITH THE HANDLEBAR.
DURING THE CLOSING AND OPENING OPERATIONS OF THE E-BIKE, TAKE CARE TO
NOT DAMAGE THE ELECTRICAL CABLES.
1
4
5
2
6
3