ICP DAS USA I-7188XB Series User Manual

I-7188XB Series User’s Manual
Warranty
All products manufactured by ICP DAS are under warranty regarding
defective materials for a period of one year, beginning from the date of
delivery to the original purchaser.
Warning
ICP DAS assumes no liability for any damage resulting from the use of
this product. ICP DAS reserves the right to change this manual at any
time without notice. The information furnished by ICP DAS is believed to
be accurate and reliable. However, no responsibility is assumed by ICP
DAS for its use, not for any infringements of patents or other rights of
third parties resulting from its use.
Copyright
Copyright©2007 by ICP DAS Co., Ltd. All rights are reserved.
Trademark
The names used for identification only may be registered trademarks of
their respective companies.
I-7188XB Series User’s Manual(Ver.1.0, Apr/2007, 7MH-020-10 ) ---
1

ICP DAS USA I-7188XB Series Specifications

General

Brand	ICP DAS USA
Model	I-7188XB Series
Category	Controller
Language	English

Summary

1. Introduction

1.1 FEATURES

Lists the main features and capabilities of the I-7188XB(D) module.

1.2 SPECIFICATIONS

Details the technical specifications of the I-7188XB(D) module, including hardware and environment.

2. Quick Start

2.1 Software Installation

Guides the user through the process of installing the necessary software for the I-7188XB(D).

2.2 Connect the Download Cable to the Host PC

Explains how to connect the I-7188XB(D) to the host PC for program download and debugging.

2.3 Downloading Programs to the I-7188XB(D)

Details the procedure for downloading programs onto the I-7188XB(D) module.

3. Writing Your First Program

3.2 Compiler and Linker

Discusses the required compilers and linkers for developing applications for the I-7188XB(D).

3.3 The Detailed Steps for Programming

Provides step-by-step instructions for developing programs for the I-7188XB(D).

Appendix E: Compiling and linking

Using the TC Compiler

4. Operating Principles

4.1 System Mapping

Details the memory mapping and interrupt handling of the I-7188XB(D) system.

4.2 Debugging custom Programs using COM1

Explains how to debug custom programs using the COM1 port for communication.

4.3 Using the Download Port as a COM Port

Describes how to configure the download port (COM1) for general RS-232 communication.

1.4 Hardware Information

Schematics and Dimensions of the I-7188XB(D)

Shows the physical dimensions and schematics of the I-7188XB(D) module.

1.4.2 Pin Assignment

Details the pin assignments of the terminal blocks for the I-7188XB(D).

1.4.3 Mounting the I-7188XB(D)

Provides instructions for mounting the I-7188XB(D) module using DIN-rail or stack methods.

1.4.4 Block Diagram

Illustrates the internal block diagram of the I-7188XB(D) controller.

1.4.5 Wiring Diagrams for Application

Shows wiring diagrams for program download and general applications.

Using a 3-wire RS-232 Port

Using a 5-wire RS-232 Port

Using the RS-485 Port

1.4.6 DI/DO wire connection

1.4.7 Mounting the I/O Expansion Bus

Type 2: COM port

InstallCom

Installs the COM Port driver.

InstallCom1

Installs the driver for COM1.

InstallCom2

Installs the driver for COM2.

Type 3: EEPROM

EE_WriteEnable

Sets the EEPROM to write-enable mode.

EE_MultiWrite

Writes data to the EEPROM.

EE_WriteProtect

Sets the EEPROM to write-protect mode.

EE_MultiRead

Reads data from the EEPROM.

Type 4: NVRAM and RTC

ReadNVRAM

Reads data from the NVRAM.

WriteNVRAM

Writes data to the NVRAM.

GetTime

Gets the system time from the RTC.

SetTime

Sets the system time for the RTC.

GetDate

SetDate

GetWeekDay

Type 6: Timer and Watchdog Timer

TimerOpen

TimerClose

TimerResetValue

TimerReadValue

DelayMs

Delay

Delay_1

Delay_2

StopWatchStart

StopWatchReset

StopWatchStop

StopWatchPause

StopWatchContinue

StopWatchReadValue

CountDownTimerStart

CountDownTimerReadValue

InstallUserTimer

InstallUserTimer1C

EnableWDT

Enables the WatchDog timer.

DisableWDT

Disables the WatchDog timer.

RefreshWDT

Refreshes the WatchDog timer.

IsResetByWatchDogTime()

Using the BC++ Compiler

Using MSC Compiler

Using MSVC++ Compiler