3
www.ictgroup.com.tw
Chapter 1
1. Installation :
1-1. Specifications :
Common
Electrical
Electrical
Thermal Dot-line Printing
Up to 80 mm/s
RS232, USB
578
8 dots/mm
3 Internal Fonts
0.125 mm
0.125 mm
50g or more
80g or more
KF50-HDA or Equivalent
21.6 ~ 26.4V DC
See page.4
938 g
Small Paper Roll- Basis Weight : 60 pounds, 80 pounds
Outside Diameter : 72 mm
Inside Diameter : 12.5 ± 0.5 mm
Width : 79 ± 0.5 mm
Large Paper Roll- Basis Weight : 60 pounds, 80 pounds
Outside Diameter : 220 mm
Inside Diameter : 12.5 ± 0.5 mm
Width : 79 ± 0.5 mm
*The length of paper for printing should be longer than 6 cm.
Standby : 1 W
Operation: 26 W
Maximum: 72 W
Operating- Temperature:
0ºC ~ +50ºC
Humidity: 20%-85%RH (No Condensation)
Storage - Temperature: -25ºC ~ +70ºC
Humidity: 10%-90%RH (No Condensation)
Print Method
Print Speed
Interface
Total Dots
Dot Density
Character Set
Heat Element
Paper Feed Pitch
Paper Feed Tension
Paper Hold Tension
Recommended Paper
Voltage Range
Outline Dimension
Net Weight
Paper Roll Dimension
Power Consumption
Operation Environment
To Next Page
Loading...
General