Important product information
Dear customer,
please note the following information about the compatibility of USB Type-C
™
hubs and adapters, including this device!
• Your host computer must have at least one free USB 3.0 20 Pin
connector on the mainboard.
• The case of your host computers also needs a free 3.5" bay.
• The IB-HUB1418-i3 is downwards compatible with USB 2.0/1.1
Type-A and Type-C
™
devices.
• The following operating systems are supported: Windows
®
Packing content:
1x IB-HUB1418-i3
1x USB 3.0 Type-A to USB 3.0 20 Pin cable
1x Set of screws
1x Quick installation quide
Description:
The IB-HUB1418-i3 fills the 3.5'' slot of a computer case with one additional
USB Type-C
™
and three USB Type-A ports. Due to the solid, cold-rolled steel
body, it has a high-quality haptic and the simple design makes it the perfect
companion for existing and future purchased devices.
Key features:
• Frontpanel with 1x USB Type-C
™
and 3x USB Type-A ports
• 1x USB Type-C
™
with a transfer rate up to 5 Gbit/s
• 3x USB Type-A with a transfer rate up to 5 Gbit/s
• Requires 1x internal USB 3.0 host (20 pin)
• Fits into a standard 3.5'' (8.89 cm) bay
Quick installation guide IB-HUB1418-i3
To Next Page
Loading...
