Packing content:
• 1x IB-HUB1423CR-U3
• 1x quick installation guide
Description:
Modern notebooks usually have less ports and no card readers. The IB-HUB1423CR-U3
has the most important ports on board, so that the familiar use of notebooks and computers
is still easy.
Key features:
• USB Type-A to 5 further ports
• 2x USB 3.0 Type-A, 1x USB 3.0 Type-C®
• Transfer rates of up to 5 Gbit/s
• SD and microSD card reader (UHS-I) up to 100 MB/s
• Supports SDHC and SDXC up to 2 TB
• Plug & Play
Application
1. Plug the IB-HUB1423CR-U3 into the Type-A port of your host computer.
2. After the IB-HUB1423CR-U3 has been plugged in correctly the LED will turn on
blue!
3. The operating system will set up the USB device automatically and is ready for
operation in a few seconds when used for the first time.
4. Connect your USB Type-C®, Type-A devices and supported memory cards* to
the appropriate ports.
Note:
*SD card
Insert the SD card into the SD card slot with the beveled corner first. The golden pins of the
card must point upwards (if the ICY BOX
®
logo is visible).
*microSD card
Insert the microSD card into the microSD card slot with the beveled corner first. The golden
pins of the card must point downwards (if the ICY BOX
®
logo is visible).
Manual IB-HUB1423CR-U3
To Next Page
Loading...
Need help?
General
