IDEAL Mexico RS 3/100 - Unpacking the Boiler; Pack A Contents; Hardware Pack Contents; Flue Pack Contents

10
Mexico Super RS 3/100 & 3/125 - Installation
Wall thickness Flue
Dimension (duct length) X shown above pack(s)
Boiler fitted flush with wall Boiler fitted in line with 600 mm kitchen units required
RS 3/100 114 to 191 mm (4
1/2" to 7 1/2") up to 125 mm (up to 5") C
229 to 305 mm (9" to 12") 163 to 242 mm (6
1/2" to 9 1/2") B
318 to 394 mm (12 1/2" to 15 1/2") 253 to 332 mm (10" to 13") B1
406 to 584 mm (16" to 23") 340 to 518 mm (13 1/2" to 20 1/2") B & D
RS 3/125 114 to 191mm (4 1/2" to 7 1/2") C
229 to 305 mm (9" to 12") B
318 to 394 mm (12
1/2" to 15 1/2") B1
INSTALLATION
The boiler is supplied fully assembled in Pack
A, together with either one or two of four
packs: B, B1, C or D. Packs B, B1 or C
contain the flue terminal appropriate to the wall
thickness. Pack D contains the flue terminal
extensions.
Unpack and check the contents.
4 UNPACKING
INSTALLATION
Table 6: this table shows the number of flue packs required for the given wall thicknesses
z Flue terminal extension
Pack D contents
FLUE PACK
Packs B, B1 and C contents
z Flue terminal assembly
z Adhesive tape
z sachet of sealing mastic - 2 off
PACK 'A' CONTENTS
z complete boiler assembly
z the Hardware Pack (listed separately)
z these Installation and Servicing Instructions
z User's Instructions.
complete
boiler
assembly
z Sachet of sealing mastic - 2 off
HARDWARE PACK
z 1" BSP plugs - 6 off
z 1" x
1/2" BSP reducing
bush - 1 off
z Distributor tube
z Thermostat pocket -1 off
z Thermostat clip - 1 off
z Thermostat retaining pin - 1 off
z Output setting label -1 off