IDEAL MSC-6KLP - Page 10

To Next Page

To Previous Page

MSC-6KLP

Sep 2022

STEP 5

Remove the lock pin on the pallet jack (Fig. 10). Place steel ball on the top of the jack ram (Fig.11)

Fig. 10 Fig. 11

Insert the ram into the hole of the base plate (Fig. 12). Lock the ram by threaded pin (Fig.13). Adjust

the length of the ram. (Fig. 14 & 15)

Fig. 12 Fig. 13 Fig.14

Put the slot of the bearing into the bracket (Fig. 16) then lock it by bolt (Fig. 17 & 18).

Fig. 15 Fig. 16 Fig. 17 Fig. 18

The Base Plate with Pallet Jack Assembly is now Complete.