Need help?Do you have a question about the ideus ITCAB400 and is the answer not in the manual?
General| Supported Protocols | SIP |
|---|---|
| Handset | Yes |
| Speakerphone | Yes |
| Type | IP |
| Network Interface | 10/100 Mbps Ethernet |
| Power Supply | PoE or 5V DC |
| Supported Codecs | G.711, G.726, G.729 |
Basic safety precautions for using the telephone equipment to reduce risks.
List of key features and capabilities of the ITCAB400 telephone.
Initial setup steps, including battery installation and line connection.
How to handle incoming calls and use speakerphone functions.
Instructions for making calls using the handset and speakerphone.
Function to dial a number before picking up the handset or activating speakerphone.
Redialing the last dialed number.
Managing incoming call records, including reviewing, calling back, and deleting.
Managing outgoing call records, including reviewing, calling back, and deleting.
Preventing automatic real-time adjustment from FSK messages.
Guide on how to set the current date and time on the telephone.
Procedure to set the local area code for dialing.
How to input and set long distance codes for dialing.
Steps to adjust the brightness and contrast of the LCD display.
How to configure the flash time duration for call handling.
Instructions for setting a PABX code for internal dialing.
Guide to set up multiple alarm clock times and functions.
Setting up secret codes for privacy and remote monitoring capabilities.
How to set up and use paging and line transfer features between phones.
Enabling/disabling anti-dialing from parallel phones to prevent unauthorized calls.
Customizing ringtones and adjusting their volume levels.
How to temporarily stop the phone from ringing during an incoming call.
Adjusting the volume for hands-free calls.
Switching between pulse and tone dialing modes.
Selecting and managing hold music for calls.
Storing and making calls using one-touch speed dial memory.
Storing and making calls using two-touch speed dial memory.
Features like baby call, baby lock, and offline mode settings.
Indication of low battery status on the LCD.
How the LCD backlight operates and its conditions.
Using the flash function for call waiting or other services.
Inserting pauses in dialing sequences, especially with PABX.
Troubleshooting steps for no audio on the handset or line.
Diagnosing issues where only receiving audio is possible.
Handling battery corrosion or leakage issues.
Troubleshooting steps to resolve audio noise during calls.
Resolving issues where the phone rings briefly and disconnects.
Diagnosing and fixing a dim LCD screen.
Troubleshooting steps when the phone does not ring.
General troubleshooting for multiple function failures.
Declaration of compliance with EU directives.
Details of the product's warranty period and conditions.
To Next Page