The accessory is waiting for the handset to configure the accessory’s
Wi-Fi
®
. The LEDs flash blue.
The Socket is waiting for the iOS device to initiate and complete pair
set up through Wi-Fi
®
.The LED is solid blue.
Pairing mode has expired and the accessory is waiting for the user to
press the button for about 3 seconds to reenter pairing mode. The
LEDs slow flash blue.
To reinitiate pairing mode, hold the button down for 3 seconds and
the LED will rapidly flash blue.
When the accessory joins a Wi-Fi
®
network, (i.e., the link is up) the
LEDs rapidly flash green for a second.
When the Socket has lost the connection to the Wi-Fi
®
network, (i.e.,
the link is down) the LEDs slow flash orange until the link is up.
When the accessory has detected 100 failed pair set up attempts, it
enters lockout mode. The LEDs slow flash red until the accessory is
factory reset.
To initiate a soft factory reset, which will clear all WiFi and pairing
To Next Page
Loading...