iEast AMP-i50B v2 - Amplifier Usage; Initial Setup and Wi-Fi Configuration (BLE)

First use & WiFi Setup（BLE）
- Connectthe power supply to the amplier.
- The green indicator light ashesand waits for a steady green.
- Make sure your mobile or pad hasconnected to your home network 2.4Gand your GPSand
Bluetooth is on.
- Open IEASTapp（for Android device, the system will ask for permission to use GPSdata &
File storage, please click “ accept” to continue.）
This GPSpermission is setup by Android for BLEusage, once setup is nished you can go to
system settings and disable it, le storage permission is to let IEASTaccessyour audio les
store in your mobile.
- The IEASTapplication will pop up all IEASTdevicesthat can be set up, select the device you
want.
- The IEASTapp will recommend the 2.4G network that the current mobile phone or pad is
connected to.
- Enteryour network password as prompted, if this is not the network you want the device to
connect to, you can change it to the network you want.
- When the connection is completed, the app will checkwhether the current rmware is the
latest version, if it is not the latest version, it will prompt to update the latest version of the
rmware.
- Follow the promptsto change the name of the device,you canchoose a presetor enter your
own desired name.
- After setting the device name, you will see it appear in the device list of the IEASTapp.
If the above method cannot nd your IEASTdevice, the app will prompt to choose an
alternative "Wi-Fi Direct" method to set it up.
Pleaseoperate as prompted by the app:
- Follow the prompts to enter the WiFi settings of your phone or tablet, search for IEAST
i50Bv2_xxxxWiFihotspot and connect.
- Return to the IEASTapp and select the wireless hotspot you want the IEASTdevice to
connect to and choose Continue.
- After setting the device name, you will see it appear in the device list of the IEASTapp.
BLEpop-up device conguration interface HOW TOCONNECT?
Scan QRCode:
Page 9
Use of amplier