PPC-5190 Flat Panel PC
Page 135
Restore on AC Power Loss [Last State]
Use the Restore on AC Power Loss option to specify what state the system returns to if
there is a sudden loss of power to the system.
Power Off
The system remains turned off
Power On
The system turns on
Last State DEFAULT
The system returns to its previous state. If it was on, it
turns itself on. If it was off, it remains off.
Resume on Ring/LAN [Disabled]
The Resume on Ring/LAN BIOS option specifies if the system will be roused from a
suspended or standby state when there is activity on the RI (ring in) modem line. That is,
the system will be roused by an incoming call on a modem.
Disabled DEFAULT
Wake event not generated by an incoming call
Enabled
Wake event generated by an incoming call
Resume on PME# [Disabled]
The Resume on PME# BIOS option specifies if the system will be roused from a
suspended or standby state when there is activity on the PCI PME (power management
event) controller.
Disabled DEFAULT
Wake event not generated by PCI PME controller
activity
Enabled
Wake event generated by PCI PME controller activity
To Next Page
Loading...
Need help?
General