Need help?Do you have a question about the IEM Tel-O-Graph GSM and is the answer not in the manual?
General| Brand | IEM |
|---|---|
| Model | Tel-O-Graph GSM |
| Category | Blood Pressure Monitor |
| Language | English |
Validation of the device's measurement accuracy according to ISO 81060-2:2013.
Confirms adherence to EU directives (MDD, RED, RoHS) and CE marking.
Lists medical and general accessories available for the blood pressure monitor.
Details the device's purpose: measuring blood pressure and pulse on the upper arm in adults.
Lists conditions and user groups for which the device must not be used.
Defines essential performance features based on IEC 80601-2-30 standards.
Explains the meaning of WARNING and ATTENTION symbols used in the manual.
Provides crucial safety advice regarding self-diagnosis and blood flow disruptions.
Covers risks related to tissue bleeding, allergic reactions, and unapproved accessories.
Details safety concerning mastectomies, other medical devices, and battery handling.
Covers battery handling, precautions around electric fields, and RF transmitter proximity.
Details precautions against fluid damage and the intended environments for device use.
Identifies and labels the main components of the blood pressure monitor device.
Illustrates and labels the components of the blood pressure cuff and its air hose.
Explains the meaning of all symbols and indicators shown on the device's display.
Specifies the required temperature, humidity, and air pressure for operation and storage.
Guides on how to unpack the device and perform an initial check for completeness and damage.
Provides step-by-step instructions for inserting the batteries and initial device startup.
Explains how to switch the blood pressure monitor on and off, and its automatic shutdown.
Details essential steps and conditions to ensure accurate blood pressure and pulse readings.
Provides instructions on how to correctly connect the air hose and select the appropriate cuff size.
Guides on uncovering the arm, ensuring skin contact, and assembling the cuff if needed.
Details the precise positioning of the cuff on the arm, including hose direction and artery marking.
Explains the recommended seated posture for taking accurate blood pressure measurements.
Step-by-step guide on how to initiate and conduct a blood pressure and pulse measurement.
Describes the measurement progression, pulse wave recording, and how to stop the measurement.
Describes the device's memory capacity for storing blood pressure and pulse readings.
Provides instructions on how to clear stored measurement data from the device's memory.
Detailed instructions for cleaning the device, cuff sleeve, and bladder/hose using mild detergents.
Information on recommended disinfectants and procedures for hygienic disinfection of the cuff.
Provides guidelines for the proper disposal of the blood pressure monitor and its batteries.
Lists common error codes during measurement, their causes, and recommended remedies.
Details error codes related to mobile network communication, SIM card, and data transmission.
Presents detailed technical data including measurement ranges, power, dimensions, and operating conditions.
Lists environmental conditions, battery capacity, data connection, and key symbols with their meanings.
Explains symbols related to moisture protection, MR safety, operating manual compliance, and defibrillator safety.
Details the two-year warranty period, exclusions, and conditions for warranty claims.
Specifies compliance levels for RF interference emissions according to CISPR and IEC standards.
Details compliance levels for electrostatic discharge and RF radiated disturbances.
Addresses magnetic field immunity at mains frequency and compliance requirements.
Lists test and compliance levels for RF interference emissions across various frequency bands.
To Next Page
