2
Symbols used
► Instruction
Important note
Non-compliance can result in malfunctions or interference.
1 Safety instructions
• Please read the product description prior to set-up of the unit. Ensure that the
product is suitable for your application without any restrictions.
• The unit conforms to the relevant regulations and EC directives.
• Improper or non-intended use may lead to malfunctions of the unit or to
unwanted effects in your application.
• That is why installation, electrical connection, set-up, operation and
maintenance of the unit must only be carried out by qualified personnel
authorised by the machine operator.
2 Functions and features
The vibration transmitter detects the vibration in the system (measured / evaluated
physical unit = vibration velocity). This is converted into an analogue signal at the
current output.
3 Installation
► Mount only in a thick housing wall
(e.g. transport thread).
► Ensure that the signal direction is
correct.
► Ensure a safe vibration transmissi-
on and allow no elastic intermediate
layers.
To Next Page
Loading...