IFR Systems FM/AM-1200S/A User Manual

PREFACE
SCOPE
This manual contains instructions for operating the FMIAM-1200S/A
Communications Service Monitor. The instruction level of this manual is
relatively basic and presupposes no previous experience'on the part of
the operator with a communication service monitor of this type.
A basic
understanding, however, of communication electronics and practical
troubleshooting methods
will be helpful. It is strongly recommended
that operator be thoroughly familiar with Sections
1 through 3 of this
manual before
attempti ng to perform any operating procedures contained
in Section
4.
APPLICABILITY
All information contained in this manual a~~lies to both the FMIAM-1200s
and FM/AM-1200A models, except where otherwise noted. For reasons of
brevity, whenever text
ifiormation is applicable to both models, the
units are referenced as
OIFM/AM-1200S/A1' (instead of FMIAM-1200s and
FM/AM-1200A separate1 y).
ORGANIZATION
The operation manual is divided into the following major sections:
SECTION
1 - INTRODUCTION
Provides a brief introduction to the
FM/AM-1200S/A including pur-
pose, functional capabilities and uses.
SECTION 2
- INSTALLATION
Provides a step-by-step procedure for setting up the
FMIAM-
1200S/A for operati on.
SECTION
3 - DESCRIPTION OF CONTROLS, CONNECTORS & INDICATORS
Identifies and functionally describes all
FM/AM-1200S/A controls,
connectors and indicators.
As an operating aid, Figure 3-1 (which locates
and identifies all FM/AM-1200S/A front panel
controls) has been incorporated into a fold-out
page. By extending the fold-out page, the
operator can easi
1 y reference any front panel
control while simultaneously performing any
operating procedure contained elsewhere in this
manual.

IFR Systems FM/AM-1200S/A Specifications

General

Brand	IFR Systems
Model	FM/AM-1200S/A
Category	Monitor
Language	English