What to do if my IGEA Cliniporator EPS02 CLINIPORATOR does not turn on?
If your IGEA Medical Equipment CLINIPORATOR doesn't turn on, first, ensure the power cord is properly connected to both the device and a functioning mains socket. If it still fails to power up, the main switch fuses might be burned out. In this case, replace them, ensuring you use fuses with the exact specifications listed on the device's data plate.
General| Device Type | Electroporation System |
|---|---|
| Model | EPS02 |
| Manufacturer | IGEA |
| Output Voltage | Up to 3000 V |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Number of Pulses | 1-99 |
| Electrode Types | Various, including needle and plate electrodes |
| Safety Features | Overcurrent protection |
| Application | Clinical electroporation for gene therapy and drug delivery |
| Pulse Duration | From 1 µs to 500 ms |
Details the main unit, PC Panel, power unit, and accessories like handles and pedal.
Provides a detailed breakdown of the device's physical components with labels.
Lists critical safety instructions on training, grounding, voltage, and avoiding liquids.
Outlines conditions where electroporation is not recommended, e.g., cardiac issues.
Describes automatic identification of connected electrodes using RFID technology.
Addresses issues when electrode TAG is not recognized and outlines manual entry.
Details connecting an R-wave trigger for synchronizing pulses with the ECG signal.
Lists technical specifications and prerequisites for using ECG synchronization.
Describes the treatment interface: patient data, parameters, and timer.
Explains ECG sync status display and management during active treatment.
Details how the system handles and reports critical errors related to the power unit.
Guides on saving and exporting treatment data via USB, including file naming.
Lists common failures, causes, and recommended solutions for the CLINIPORATOR.
Provides a table of error messages, their causes, and suggested resolution actions.
Lists errors unresolvable by users, requiring customer service contact.
Details compliance with EMC standards and guidelines for emissions and immunity.
To Next Page
