EasyManua.ls Logo

iGenix IG255W - Page 9

iGenix IG255W
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
Operating Sounds
The cooling gas which circulates in the cooling circuit may make a slight noise (bubbling sound) even
when the compressor is not running. Do not worry this is quite normal.
If these sounds are different check that:
The appliance is well levelled
Nothing is touching the rear.
The stuffs on the appliance are vibrating.
Bulb Replacement
If the internal Light is LED it is advised to contact a qualied technician to replace the bulb.
1. Turn the thermostat control to Setting 0.
2. Disconnect the appliance from the mains supply.
3. Hold and twist the lamp cover to remove
4. Unscrew the bulb, in an anti-clockwise direction and remove bulb. (insert the image)
5. Replace the bulb with a new bulb of the correct size and type (220~240V, max. 15W).
6. Ret the lamp cover and then plug back into the mains supply and switch on.

Related product manuals