Why my iGenix IG7004 doesn't work?
If your iGenix Kettle isn't working, consider these possible causes and solutions: 1. Ensure the kettle is firmly plugged into the mains wall socket. 2. Check the fuse or breaker to confirm there is electricity in the mains wall socket. 3. Make sure the On/Off switch is turned on. 4. If the safety cut-out has activated, fill the kettle and allow it to cool for a few minutes.
What to do if my iGenix IG7004 Kettle cuts out before boiling?
If your iGenix Kettle cuts out before it boils, it is likely due to a large build-up of scale inside. Use a descaling agent to clean the kettle regularly.
How to prevent iGenix IG7004 from scaling up quickly?
If your iGenix Kettle scales up quickly, especially if you live in a hard water area, regularly de-scale your kettle.
General| Capacity | 1.7 L |
|---|---|
| Material | Stainless Steel |
| Water Level Indicator | Yes |
| Auto Shut Off | Yes |
| Boil-Dry Protection | Yes |
| Cordless | Yes |
| Base | 360° Swivel Base |
| Power | 2200W |
To Next Page