Iget CYCLO C210 - Warranty Terms and Conditions; General Warranty Information; Warranty Exclusions

7
Warranty card:
Product:
Model:
Serial / Batch number:
(S/N)
Date of sale:
Warranty until:
Sale document number:
Seal of the store:
Information for Customers about Warranty Terms and Conditions:
Warranty shall apply to defects of purchased product, found during its warranty period. When purchasing a particular product,
please consider carefully what properties and functions you expect your product to have. The fact that purchased product shall
not satisfy your later requirements shall not give any reason for complaint. Please, prior to the first use of this product read
carefully its operating instructions and follow these instructions consistently.
We recommend you to keep original product packing during the warranty period for possible transport of the product in such a
way so as to prevent any product damage during its transport and handling.
For the purpose of due application of any complaint about the product we recommend you to ask Seller to fill-in and confirm this
Warranty Card including identification of serial number of purchased product, which shall comply with the serial number
specified both in the document proving product purchase and delivery note and purchased product.
In this connection Customer hereby takes into account that unless this Warranty Card specifies serial number of purchased
product, i.e., comparison of such serial number identified in the product with the serial number identified in this Warranty Card
and document of product purchase/or delivery note shall not allow to confirm that particular product has come from Seller, in
case of any doubts about the origin of such particular product Seller shall be entitled to automatically and without any other acts
to reject the complaint of such goods.
Warranty shall not apply to:
- product damage suffered by unqualified installation of firmware or its modification;
- product damage by static electricity;
- product use for any other purposes than designed, described in attached operating instructions;
- damage to warranty seal of the producer, attached to the product;
- product damage inconsistent with the operating instructions, technical standards or safety regulations valid in
the Czech Republic;
- product damage resulting from normal wear and tear;
- discharged batteries, decrease in battery capacity caused by its wear and tear;
- product defects caused by the use in dusty, polluted or in any other way dissatisfactory environment pursuant to
attached operating instructions.
Wear and tear of the product and its components caused by their common use (discharged batteries, decreased capacity of
accumulator, wear and tear of mechanical or displaying components, wear and tear of supply cables, headphones etc.) shall be
subject neither to defect warranty nor quality warranty in the moment of take-over.
Furthermore, complaints about product parameters, not included in the operating instructions or in any commercial-technical
documentation of Seller, related to the product, shall not be subject to quality warranty in the moment of take-over.
Proof of product purchase, or delivery note, shall constitute an integral part of this Warranty Card.