To Next PageTo Next PageWhat to do if my Igloo FRW197 does not operate?
If your Igloo Wine Cooler isn't working, make sure it's plugged in. Also, check the circuit breaker or fuse box, as a tripped breaker or blown fuse could be the cause.
Why does my Igloo Wine Cooler seem to make too much noise?
Your Igloo Wine Cooler might be noisy for a few reasons. The rattling noise could be due to the normal flow of refrigerant. You might also hear gurgling sounds as each cycle ends, which is also caused by the refrigerant. Additionally, popping and crackling noises can occur due to the contraction and expansion of the inside walls. Finally, check if the wine cooler is level, as an unlevel cooler can also generate excessive noise.
What to do if the door of my Igloo FRW197 Wine Cooler will not close properly?
If the door of your Igloo Wine Cooler won't close properly, it could be due to several reasons. First, ensure the wine cooler is level. Another possible reason is that the door was reversed and not correctly installed. Also, check if the gasket is dirty or if the shelves are out of position.
Why does my Igloo Wine Cooler turn on and off frequently?
Your Igloo Wine Cooler might be turning on and off frequently due to several factors: * The room temperature might be hotter than normal. * The door may be opened too often or not closed completely. * The temperature control might not be set correctly. * The door gasket may not seal properly. * The wine cooler might not have enough clearance.
How to stop Igloo Wine Cooler vibrations?
To stop vibrations in your Igloo Wine Cooler, check to make sure that it is level.
General| Brand | Igloo |
|---|---|
| Model | FRW197 |
| Category | Wine Cooler |
| Capacity | 18 bottles |
| Cooling System | Thermoelectric |
| Door Type | Glass door |
| Shelves | chrome shelves |
| Voltage | 115V |
Highlights severe personal injury or death risks from specific actions.
Outlines risks of extensive product damage or serious personal injury.
Details unpacking, checking parts, and initial cleaning before operation.
Specifies requirements for freestanding installation, ventilation, and placement.
Details how to adjust the temperature dial for optimal cooling performance.
Provides information on the number of bottles the cooler can hold.
Explains when and how to defrost the unit to remove frost buildup.
Provides instructions for cleaning the interior and exterior surfaces safely.
Details the step-by-step process to change the door opening direction.
Offers guidance on how to prepare the unit for short and long periods of non-use.
Advises on the correct procedure for safely transporting the appliance.
Suggests methods to optimize energy efficiency and reduce running costs.
