Ignition Co9Z LED Flood IP65 540W RGBW User Manual

44 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Co9Z LED Flood IP65 540W RGBW

LED oodlight

User manual

Questions and Answers:

T
Thomas BradshawAug 11, 2025
What to do if Ignition Co9Z LED Flood IP65 540W RGBW does not respond to the DMX controller?
- S
  scottjonesAug 11, 2025
  If your Ignition Flood Light isn't responding to the DMX controller, there are several things you can check: * Ensure the DMX connectors and cables are properly connected. * Try using a different DMX controller to rule out a controller issue. * Make sure the DMX cables aren't running near high-voltage cables, as this can cause interference. * Press the Mode button until the display shows 'ADDRESS XXX'. * Verify that ‘DMX’ is selected in the ‘DMX Signal Select’ menu for a wired connection.
C
Christopher RichardsAug 17, 2025
What to do if Ignition Co9Z LED Flood IP65 540W RGBW does not respond to the W-DMX signal or responds with delay?
- V
  Victoria FoxAug 17, 2025
  If your Ignition Flood Light isn't responding to the W-DMX signal or is responding with a delay, consider these steps: * Check the transmission mode of the W-DMX transmitter. * If possible, test the connection in G5, G4S, or G3 mode. * Remember that the W-DMX of all units must be reset after changing the transmitter.

Ignition Co9Z LED Flood IP65 540W RGBW Specifications

General

Power	540W
IP Rating	IP65
Color	RGBW
Type	LED Flood
Light Source	LED