4. Rotate the front wheel to wake up SPD61 ( the green light and red light will be flashing
alternately for 2 seconds)
5. Please keep SPD61 away from magnetic substances at least 1 meter.
4. PRODUCT MAINTENANCE
As a high tech electronic product, proper maintenance will lengthen the working life.
Speed sensor:
1. Clean the dust of the surface by a soft brush regularly.
2. Keep the inside of SPD61 dry while replace the battery.
3. Please do not soak in water for a long time.
Strap:
Wash the strap regularly, make sure there is no crack on it.
5. CONNECT WITH MASTER DEVICE (ANT+ OR BLUETOOTH 4.0)
Steps:
1. Wake up SPD61 by rotating the front wheel.
2. Search speed sensor in master device.
Note:
1. SPD61 is compatible with standard ANT+ protocol as a speed sensor.
2. SPD61 is compatible with Bluetooth 4.0 as a speed sensor.
To Next Page
Loading...