» Select “iHome iBT371” on your device’s Bluetooth
menu to complete pairing.
» Control audio volume with or Buttons.
» Control track navigation through your device.
FRONTBACK
iBT371 QSG
Size: 120 x 100 (mm)
November 14, 2016
Model: iBT371
Contact Us: 1•800•288 • 2792
CHARGE UNIT BEFORE
USE - ABOUT 2 HOURS
» Connect the micro-USB plug on the included
charging cable to the USB in charging jack on
the speaker.
» Connect the larger USB plug to a powered USB
port such as a USB AC adapter.
USB AC adapter
(not included)
USB AC
adapter
connected to
working outlet
LED Status indicator
Flashing red = low battery
Solid red = charging
In the Box
» iBT371 speaker » charging cable
QUICK START GUIDE
Model: iBT371
QUICK START GUIDE
Speakerphone
Bluetooth: Pairing & Playing
» Make your device “discoverable” by turning on
Bluetooth mode.
» Press and hold the Power Button for 2 seconds
to turn on unit.
» The first time the
unit is powered
on it will enter
auto-pairing mode.
» Power on speaker
» Press and hold the
Bluetooth Pairing
Button for 2 seconds.
» The speaker must be on and connected with
a paired Bluetooth device to recieve calls.
» Press the Bluetooth/Speakerphone Button
to answer call.
» Press the Bluetooth/Speakerphone Button
again to end call.
Contact Us: 1•800•288 • 2792
For warranty and full instructions
visit: www.ihome.com/support
For warranty and full instructions
visit: www.ihome.com/support
Waterproof Operation
» For waterproof operation, ensure the waterproof
cover on side of unit is pressed completely flush
with the unit.
Manual Pairing
Pairing the First Time
-OR-
» Press the Color Mode Button to cycle
through modes:
FAST FAVORITE COLORSLOW PULSE TO MUSIC
PRESET PULSE OFF
Color Changing Modes
Red LED o = fully charged
Flashing blue and red= pairing
To Next Page
Need help?
General
Weight and Dimensions
