Ihse Draco tera 480 Series - Management Software Toolbar; Management Software Mouse Control

Access Options Draco tera IP Gateway
18
Information for Operating and for Support Functions
The operation of the management software is intuitive and corresponds to the user interface of common operating
systems.
The management software contains its own support function. The integrated help texts in the working area of the
management software can be activated or deactivated by ticking the checkbox in the upper right corner. Auxiliary
names (tooltips) for the menu items can be activated under Extras > Options on the Style tab.
5.2.2 Management Software Toolbar
Some functions are only available if a connection to the matrix has been established (online mode). The respective
functions are colored if available.
Fig. 6 Management software Toolbar
1 Load a locally saved configuration
2
Save a configuration locally
3
Reload the current configuration
4
Connect to the matrix
5
Disconnect from the matrix
6
Activate/deactivate the edit mode
7
Save the active configuration on the matrix
(online)
8
Download and show a predefined configuration saved
on the matrix (online)
9 Upload a predefined configuration on the matrix
(online)
10
Monitoring (online)
11
Flash update for single devices
12
Overview of devices in the subnet (online mode)
13
System check
14
Save status locally (online mode)
5.2.3 Management Software Mouse Control
The following mouse commands are selectable for menu functions:
Mouse command Function
Left mouse button Select menu, select function, open drop-down menus, enter input field, activate/deactivate
option checkboxes, etc.
Double-click left mouse
button
Open function specific selection menus
Right mouse button Open context specific selection menus
1 2 3 4 5 6 7 8 9 10 11 12 13 14