Ihse Draco tera 480 Series - Setting up Network and Firewall Releases; Connecting the Matrix to the Computer

Draco tera IP Gateway Installation
25
6.2.2 Setting up Network and Firewall Releases
Releasing Network Ports
The following ports are used by the matrix depending on the configuration and have to be released at the security
gateway if necessary. The ports will only have to be released if you want to use the respective function.
Function Port
FTP 21/TCP
DNS 53
SNTP
123/UDP
SNMP 161/162, both UDP
LDAP 389 (636 for SSL)
Syslog 514/UDP
Communication 52000 to 52100
API 5555/TCP (5565 for SSL)
Broadcast
5556/UDP (5566 for SSL)
Matrix Grid 5557/TCP (5567 for SSL)
Releasing Java Application in the Firewall
If using the management software, the Java application (file javaw.exe) has to be released in the firewall settings to
use the management software. Contact your administrator to configure the firewall settings accordingly.
Using the management software with integrated Java Runtime, a request of the operating system could appear, e.g.,
if opening the Device Finder.
6.2.3 Connecting the Matrix to the Computer
NOTICE
For a connection between computer and matrix via switch or hub, parallelly assembled network cables are
required.
 Only use a network connection between computer and the matrix that is not primarily used for streaming audio
or video data.
 Connect the network cable to the RJ45 ports of the computer and the controller board of the matrix.