Draco tera IP Gateway Configuration
31
5. By default, the channel type is set to Grid. If the channel type in the line of a source port that has to be used for
Matrix Grid connection via IP Gateway is set to EXT Unit, double-click on the corresponding selection box of the
port to be configured within the Type column and select Grid.
Fig. 13 Management software menu System Settings - IP Gateway - Select Channel Type
6. Double-click in the respective Select Grid Channel field.
A drop-down menu is opened listing all available ports that are configured for use as grid line.
7. Click on the desired port in the list.
Fig. 14 Management software menu System Settings - IP Gateway - Select Grid Channel
To Next Page
Loading...
