Ihse Draco tera 480 Series - Deleting an IP Gateway Connection

Configuration Draco tera IP Gateway
34
7.1.2 Deleting an IP Gateway Connection
We strongly recommend deleting IP Gateway connections only via Master Matrix.
To delete an IP Gateway connection, proceed as follows:
1. Connect to the Master Matrix.
2. Click System Settings > IP Gateway in the task area.
3. Click Activate Edit Mode in the toolbar.
4. Click the slot with the IP Gateway board under Slot of which an IP Gateway connection has to be deleted.
5. Click the red cross in the respective line to delete the connection of an IP Gateway board.
The connection settings has been deleted on both IP Gateways.
It is necessary to delete the connection in both matrix configurations. We recommend connecting to the second
matrix to check if the data of the connection has been removed. If not, click the red cross in the respective line to
delete the data of the connection.
6. Click Deactivate Edit Mode in the toolbar.