Draco tera IP Gateway Maintenance
37
8.3 Querying the Network Status
The current network status is displayed in this menu.
1. Click System Settings > Network in the task area to query the network configuration.
Fig. 19 Management software menu View - Matrix
2. Click a network port of the controller board with the left mouse button.
The corresponding network status will be displayed in the panel on the right side of the working area.
The available information can be faded in or hidden by pressing the left mouse button on the "plus" or "minus"
icon.
The following information is available:
Port color Description
IP Address IP address if DHCP is not active.
Subnet mask if DHCP is not active.
Gateway address if DHCP is not active.
MAC Address MAC address.
To Next Page
Loading...
