Ihse Draco tera enterprise 480 Series - Enabling the Automatic Creation of Real CPU and con Devices; Fig. 102 Management Software Menu System Settings - System - Automatic ID

Configuration via Management Software Draco tera enterprise
154
7.4.2 Enabling the Automatic Creation of Real CPU and CON Devices
The assignment of EXT Units to real CON or CPU Devices can be made manually or automatically when
connecting a new extender module to the matrix.
The settings for automatic creation of CPU and CON Devices and the initial values for the ID numbers of
real or virtual CON or CPU Devices are set in this menu.
Fig. 102 Management software menu System Settings - System - Automatic ID
The following parameters can be configured:
Field Entry Description
Enable Auto Config Activated Enable the automatic creation of a new CPU or CON Device if
new extender modules are connected (default).
The new CON or CPU Device is assigned to the automatically
created EXT Unit of the extender module.
Deactivated Function not active
ID Real CPU Device Numerical Enter the initial value for automatic assignment of real CPU
Devices (default: 1001).
ID Virtual CPU Device Numerical Enter the initial value for created virtual CPU Devices (default:
2001).
ID Real CON Device Numerical Enter the initial value for automatic assignment of real CON
Devices (default: 3001).
ID Virtual CON Device Numerical Enter the initial value for created virtual CON Devices (default:
4001).