Ihse Draco tera enterprise 480 Series - Fig. 113 Management Software Menu Extras - Options - SNMP

Draco tera enterprise Configuration via Management Software
175
Setting up SNMP Options
Presets for an SNMPv3 user can be set up for the computer on which the management software is
operated are set in this menu.
To set or activate the presetting, proceed as follows:
1. Click Extras > Options in the menu bar and open the SNMP tab.
2. Enter the appropriate data.
3. Click Ok to confirm the entries.
4. Close the management software and restart it.
Fig. 113 Management software menu Extras - Options - SNMP
The following options are available:
Option Description
Port
SNMP port (default: 162).
Log File Directory Default directory to store the log files.
Log File Name Default name of the log file.
Log File Extension Default extension for the log file.
Daily Log Files Log files are stored every 24 hours (daily).
Maximum Log File
Size [KB]
Allowed maximum size of log file.
When reaching the maximum log file size, a new log file will be created.
Maximum Number of
Log Files
Allowed maximum number of log files.
When the maximum number of log files is exceeded, the oldest logfile will be
overwritten with the new information (log rotate).
Acoustic Notification Enables acoustic notification for errors.
Autostart When starting the management software, the SNMP logging will be started in
the background.
Open Monitoring Tab When starting the management software, the monitoring tab will be opened.