Operation via OSD Draco tera enterprise
306
9.1.5 Switching of single EXT Units within Devices
You can independently switch CON Devices and CPU Devices with single EXT Units within configurations
consisting of CON Devices and CPU Devices with multiple EXT Units.
To switch a CON Device with a single EXT Unit to a CPU Device with multiple EXT Units, proceed as
follows:
1. Click Switch in the main menu.
2. Select the respective CPU Device in the CPU Devices list containing the EXT Unit you want to have
access to.
3. Press F7 on the keyboard. The standard will change into the switching mode for CON Devices with a
single EXT Unit.
4. Select the EXT Unit you want to switch within your CON Device.
5. Press Tab to access the EXT Unit list of the selected CPU Device.
6. Select the CPU EXT Unit you want to switch to.
7. Press Space to execute the switching operation.
EXT Units from a Device is only possible in Video Only mode. Single EXT Units of a
Device that are already switched will be highlighted with "
!".
To Next Page
Loading...
