Ihse Draco tera enterprise 480 Series - Restarting the Controller Board; Fig. 225 Management Software View - Matrix - Restart Controller Board

Draco tera enterprise Operation via Management Software
319
12.2.2 Restarting the Controller Board
To perform a restart of the controller board, proceed as follows:
1. Click View > Matrix in the task area.
2. Click with the right mouse button on the symbol of a network port of the controller board to be restarted.
A context menu appears.
3. Click the Restart CPU Board function in the context menu.
Note: The controller board will be restarted immediately without user confirmation. The symbols of the
network ports are red for a short time in the overview. When the symbols of the network ports are green
again, the restart of the controller board was successful.
Fig. 225 Management software View - Matrix - Restart Controller Board