Ihse Draco tera enterprise 480 Series - Fig. 58 OSD Menu Configuration - Date+Time; Date and Time

Configuration via OSD Draco tera enterprise
90
6.3.8 Date and Time
The parameters for the system configuration are set in this menu, based on Simple Network Time Protocol
(SNTP):
Fig. 58 OSD Menu Configuration - Date+Time
The following parameters can be configured:
Time Server
Field Entry Description
SNTP Client Y Enable the network time server synchronization.
N Function not active (default).
SNTP Server
Byte Enter the SNTP server IP address (default: 000.000.000.000).
Time Zone Region Set your specific time zone (default: GMT + 00).