Recording Function
All messages shown in the Syslog are equipped with various recording
functions.
➔ In order to store messages shown in the Syslog (filtered or unfiltered),
press the Save trace button. The messages will be stored in a .txt
file.
➔ In order to remove messages shown in the Syslog, press the Clear
trace button.
➔ In order to stop recording messages, press the Pause button. In order
to continue press the button again.
Pos: 37 /806-IHSE/ Beschreibu ng/SNMP/480-xx @ 8\mod_ 13527948571 31_6.doc @ 69602 @ 2 @ 4
3.10 SNMP
The SNMP function allows all function-critical and safety-critical elements
of the matrix to be monitored and queried. This function complies with the
RFC 1157 conformal standard.
When using SNMP monitoring, it is recommended that a dedicated
network is used to maintain continuous access.The read only community
for the MIB file is draco.
To Next Page
Loading...
