Installation
2020-02-26 53
4 Installation
Pos: 41 /806-IHSE/ Installation/Li eferumfang pr üfen/480-xx @ 7\mod_130993 5842774_6.do c @ 52736 @ 2 @ 1
4.1 Package Contents
Your package contains the following items:
Draco tera matrix
1x power cord per built-in power supply unit
1x serial control cable
Mounting accessories
Quick Setup
If anything is missing, contact your dealer.
Pos: 42 /806-IHSE/ Installation/Sys tem anschließ en/480-xx @ 7\mod_13099 35998118_6.d oc @ 52754 @ 2 @ 1
4.2 System Setup
First time users are recommended to setup the system in the same room
as a test setup. This will allow you to identify and solve any cabling
problems, and experiment with your system more conveniently.
Setup of the matrix
1. Install the CPU and I/O boards.
2. Connect keyboard, mouse and monitor to the CPU board of the
matrix.
3. Connect the matrix to the power supply.
4. Open OSD via keyboard command <'Hot Key'>, <o> and login with
administrator rights in the main menu under configuration (see
Chapter 5.2.1, Page 63).
5. Configure initially as requested.
After the configuration of the system it is recommended to save the
configuration by selecting Configuration > Save and restart the matrix by
selecting Restart Matrix.
6. Optional: Establish a network connection between the matrix and the
Java Tool in order to set an extended configuration (see
Chapter 5.2.2, Page 68).
To Next Page
Loading...
