Manual Configuration 3 of 4
If you wish to keep the default WiFi settings,
simply leave all boxes blank and click Next until
you reach the Router Security Settings step in the
Setup Wizard, which is covered on the next page.
1. Wireless 2.4GHz must be turned ON in order to
connect to this network. If SSID Broadcast is OFF,
your network name will not be visible to WiFi
devices and you’ll have to enter it manually to
connect.
2. The 2.4Hz SSID Broadcast name is the name of
your 2.4GHz WiFi network. You can change this to
anything you’d like.
3. Click Next and make sure Security Key Type/
Security Mode is set to WPA+WPA2 PSK.
4. The 2.4GHz Security Key is the password for your
2.4GHz WiFi network. Change this to something
that’s hard for others to guess but easy for you to
remember. You may wish to write down your new
WiFi details for future reference.
5. Click Next and run through steps 1-4 again for
your 5GHz WiFi network. Your modem has 2
WiFi networks which broadcast on different
frequencies. If your device(s) can’t connect to the
latest 5GHz network, use the 2.4GHz one.
6. Click Next and turn to the next page to continue
with your manual configuration.
17
To Next Page
Loading...