Need help?Do you have a question about the Iiyama Vision Master Pro 450 and is the answer not in the manual?
General| Screen Size | 19 inches |
|---|---|
| Max Resolution | 1600 x 1200 |
| Aspect Ratio | 4:3 |
| Viewable Size | 18 inches |
| Horizontal Scan Rate | 30-96 kHz |
| Vertical Scan Rate | 50-160 Hz |
| Input Signal | Analog RGB |
| Connector | 15-pin D-Sub |
| Input Connectors | 1 x VGA |
Required equipment and preliminary steps for monitor setup.
Details on User/Factory modes, degaussing, and lock out facility.
Procedures for voltage, sensor, free-running, blanking, linearity, and centering adjustments.
Adjustments for linearity, centering, tilt, size, position, distortion, color, and gray scale.
Procedures for brightness, convergence, raster, focus, and luminance adjustments.
TCO requirements and VLF adjustment procedures.
Procedure for correcting landing discoloration using a landing meter.
Includes Yvs, static convergence, bow magnet, differential coil, YV, and YH adjustments.
Lists ICs for deflection, HV, power, video, CRT, and microprocessor circuits.
Detailed pin assignments and functions for main and sub microprocessors.
Description of Power Factor, Main Power, and Sub Power circuits.
Protection, power management, degauss, signal, sync, and control system circuits.
Description of video, OSD, deflection, focus, and beam focus circuits.
Video/OSD control, color control, and landing correction circuits.
Abbreviations, marks, family tree, and assembly overview.
Detailed parts for Monitor, PWB-MAIN, PWB-VIDEO, and Sub Material.
Abbreviations and tolerance marks for electrical parts.
To Next Page